一种新的拓扑指数及其在有机化合物结构/性质相关性研究中的应用

以距离矩阵为基础，提出一种表征化合物分子结构的拓扑指数，并将其用于预报饱和链烃类、醇类和含氮芳香类化合物的性质和活性，获得了满意的结果。     

煤飞灰中铬铁元素的形态分析研究

用连续提取法将煤飞灰中的铬、铁元素依结合态区分为水溶态,交换态,表面氧化物和碳酸结合态,铁锰氧化物结合态,金属有机物和硫化物结合态,磁性四氧化三铁结合态和硅铝酸盐矿物态,用原子吸收法及X-衍射分析进行测定。并对煤飞灰化学形态分布进行了讨论。     

海水水质评价的倍斜率隶属函数聚类法

建立了宽域式倍斜率聚类的海水水质评价模式，其函数的右侧斜度为左侧斜率的２倍，勿求权重，直接聚类，海水水质评价实例说明，本文模糊综合评判法和灰色聚类法和更为合理，实用。     

电厂温排水对水库生态环境的影响

本文报告了电厂温排水对陡河水库生态环境的影响。结果表明,陡河水库年均水温比对照水体洋河水库提高2.8～4.8℃。溶解氧随着水温而变化,但从未低于5.0mg/l,增温后水体中各种营养盐类含量呈增加趋势,水体富营养化明显。     

水解-接触氧化工艺处理高浓度米果废水

采用水解—接触氧化—沉淀工艺处理高浓度米果废水，设计规模为100m^3／d。处理后的CODcr，BOD5，SS和色度的去除率分别达到96．8％，97．7％，94.4％，94．7％，总排放口水质为：pH=7．61，CODcr=70．7mg／L，BOD5mg／L，SS=29．2mg／L；色度的稀释倍数为8。     

甲烷高温自燃诱导过程实验与数值模拟研究

甲烷的转化在化工产业中具有举足轻重的地位与战略意义,近年来涌现的氧化偶联制烯烃等多种新型化工工艺涉及高温条件的甲烷-纯氧等体系的混合与反应过程,明确甲烷高温自燃诱导与爆炸规律是实现工艺安全设计与运行的前提,然而相关研究与基础数据仍较为欠缺。通过利用基于快速压缩装置的高温高压燃爆测试系统开展甲烷-纯氧等典型混合体系的自燃诱导过程研究,同时基于GRI-Mech 3.0机理的数值模拟方法进行了数值模拟研究。实验结果与数值模拟结果吻合较好,随着温度/压力的增加及氧气含量的下降,混合体系自燃诱导时间均缩短;燃料气中加入乙烷或氢气则会大幅缩短自燃诱导过程。对于多个工艺过程中涉及的低氧含量体系率先开展了研究,得到了不同当量比及温度条件下的典型体系自燃诱导时间,同时考察了惰性气的加入对于自燃诱导过程的延长作用。研究结果有助于深入理解甲烷自燃诱导机理,同时指导高温条件的甲烷转化工艺的本质安全化设计与爆炸防控。     

纳米TiO_2光催化降解酸性红B的实验研究

采用偶联剂法在聚丙烯多面球表面负载化纳米TiO2,在高压汞灯照射下,以酸性红B染料为研究对象,采用光催化氧化法进行降解处理;研究了溶液初始浓度、H2O2和Fe3+投加量、pH以及光照强度等因素对酸性红B染料降解效果的影响。     

催化超临界水氧化处理1,5-萘二磺酸

采用Mn2O3/γ-AL2O3和V2O5/γ-Al2O/为催化剂,在一连续流固定床反应器中进行了超临界水氧化1,5-萘二磺酸实验.实验结果表明,在380～440℃,24 MPa条件下,Mn2O3/γ-Al2O3和V2O5/y-Al2O3催化剂对1,5-萘二磺酸的氧化降解具有显著的促进作用,TOC去除率达到90%以上;催化剂的催化效果随反应温度的升高而增强,随pH值的降低而增强,随停留时间的延长先增强后趋于平缓.     

Toxicity of copper on rice growth and accumulation of copper in rice grain in copper contaminated soil

Pot soil experiments showed that copper (Cu) is highly toxic to rice. Rice grain yields decreased exponentially and significantly with the increase of soil Cu levels. Rice grain yield was reduced about 10% by soil Cu level of 100 mg kg(-1), about 50% by soil Cu level of 300-500 mg kg(-1) and about 90% by soil Cu concentration of 1,000 mg kg(-1). Root was more sensitive to soil Cu toxicity than other parts of rice plant at relatively lower soil Cu levels (less than 300-500 mg kg(-1)), but the growth of whole rice plant was severely inhibited at high soil Cu levels (300-500 mg kg(-1) or above). Cu concentrations in rice grain increased with soil Cu levels below 150-200 mg kg(-1), but decreased with soil Cu levels above 150-200 mg kg(-1), with peak Cu concentration at soil Cu level of 150-20 mg kg(-1). Cu was not distributed evenly in different parts of rice grain. Cu concentration in cortex (embryo) was more than 2-fold that in chaff and polished rice. More than 60% of the Cu in grain was accumulated in polished rice, about 24% in cortex (embryo), and about 12% in chaff. So, about 1/3 of the Cu in rice grain was eliminated after grain processing (chaff, cortex and embryo was removed).     

Characterizing the risk assessment of heavy metals and sampling uncertainty analysis in paddy field by geostatistics and GIS

For many practical problems in environmental management, information about soil heavy metals, relative to threshold values that may be of practical importance is needed at unsampled sites. The Hangzhou-Jiaxing-Huzhou (HJH) Plain has always been one of the most important rice production areas in Zhejiang province, China, and the soil heavy metal concentration is directly related to the crop quality and ultimately the health of people. Four hundred and fifty soil samples were selected in topsoil in HJH Plain to characterize the spatial variability of Cu, Zn, Pb, Cr and Cd. Ordinary kriging and lognormal kriging were carried out to map the spatial patterns of heavy metals and disjunctive kriging was used to quantify the probability of heavy metal concentrations higher than their guide value. Cokriging method was used to minimize the sampling density for Cu, Zn and Cr. The results of this study could give insight into risk assessment of environmental pollution and decision-making for agriculture.